Just a few Mods!

[willi]

Here we go!
I will update as the list grows:

For looks:
Asanti af 130 3 piece 22" staggered wheels. Centers Brilliant Black, Chrome lips - SOLD
Continental ContiCross UHP 295/30/22 Rear & 265/35/22 Front - SOLD
Kusse color matched grill w/ chrome wing

Performance Driving:
Viper Replica Factory Reproduction wheels black with sublime lip
Bridgestone RE050A Pole Position tires 275/30/20
KW v2 Coilovers - Going back to KW
Hotchkis Sway bars front and rear - SOLD
Razors Edge Motorsports Adjustable Sway bar end links - SOLD
Razors Edge Motorsports 4 point shock tower braces Front and Rear - SOLD
Pedders Bump Steer correction kit
Magnaflow Hi-flow cats - SOLD
Gibson cat-back exhaust - SOLD
Diablo Sports computer programmer - SOLD
Billet Technology Catch can (waiting on new CAI before install) - SOLD
Stop Tech stainless steel brake lines
Brake ducting to center of rotor for cooling
Motul 600* brake fluid
EBC Red Stuff pads
EBC Yellow Stuff pads
Extra set of SRT slotted rotors
Rolled fenders
All side molding removed
Billet Technology park lock fix - SOLD
Mopar bracket and screw in front tow hook - GONE
Royal Purple oil and fluids
K&N oil filter
Eibach adjustable upper control arms (camber and caster adjustment) - For Sale
Schroth Rallye 4 point ASM Harnesses for both front seats - For Sale
Razors Edge Motorsports Matrix Frame Braces - SOLD
Razors Edge Motorsports Bump steer kit - Going back to REM

[Rocks]

I don't think you have enough mods. I think you need a couple more. Sounds like an awesome setup. Did you have your car at the event last week at Texas Motor Speedway because I think I saw it.

[CamoCharger]

That is one sick sounding ride my freind. Will you ever stop? LOL.

[willi]

I don't think you have enough mods. I think you need a couple more. Sounds like an awesome setup. Did you have your car at the event last week at Texas Motor Speedway because I think I saw it.

I did but, I was not driving in the event. I parked in the pit area against the wall

Did I meet you and give you a DFWLX card at MSR a month or so ago?

[willi]

That is one sick sounding ride my freind. Will you ever stop? LOL.

Stop......................
With all the new parts in development for the chally. This list should grow quickly!
The cool part about all these mods is, they will all transfer to a chally (should I decide to go that route in a year or so!)

[Rocks]

I did but, I was not driving in the event. I parked in the pit area against the wall

Did I meet you and give you a DFWLX card at MSR a month or so ago?

No you didn't give me a card. I just saw the black on black 300 and then put two and two together when you said you were there. My two favorite cars there were the GT3 Porsche with yellow lights and the 08 ACR Viper.

[Intox]

Too much money and time...let me borrow some! lol

[Mecha]

willi,

you need to talk with XERYDER on lx and chargerforums.

he roadraces his sublime daytona he has pretty much the full road coarse/nascar package on his car. front and rear spoilers etc.

http://www.chargerforums.com/forums/member.php?u=17196

[cadzilla74]

willi, did you install the Hotchkis sways yourself? Or did you have hem done by a local shop?

[willi]

Cadzilla,
I did them. But I did them in a race shop if that counts LOL! They are not bad. You will have to drop the exhaust in the rear and the cradle. The front made a little bit of difference, the rear made a night and day difference!!!! Make sure you have an appointment for an alignment once you get the cradle back in, you will need one!

Also, I noticed you are looking at shock tower braces. The mopar one is no where as good of a design as the Razors Edge. It just bolts to the stock brace which is junk to begin with. The Razors edge is easy to install and definatly worth it. The rear is also worth the money. I am still waiting on my frame braces to show.

[cadzilla74]

Cadzilla,
I did them. But I did them in a race shop if that counts LOL! They are not bad. You will have to drop the exhaust in the rear and the cradle. The front made a little bit of difference, the rear made a night and day difference!!!! Make sure you have an appointment for an alignment once you get the cradle back in, you will need one!

Also, I noticed you are looking at shock tower braces. The mopar one is no where as good of a design as the Razors Edge. It just bolts to the stock brace which is junk to begin with. The Razors edge is easy to install and definatly worth it. The rear is also worth the money. I am still waiting on my frame braces to show.

Thanks willi ... yeah I'm kinda stuck here getting my sways installed ... once my friend looked at the instructions for the rear he backed off wanting to do it, so now I need to find a reasonably priced shop.

I'm definitely going with the Razor's Edge front shock tower brace. I don't know about the rear one though. I can not afford to lose any cargo space in the Magnum since my drums take up the whole back with the seats down as it is. Doesn't the rear one intrude into the cargo space or am I way off on that guess?

[willi]

Bunch of new stuff on order, headed this way, or here waiting for install for the track!

KW v2 Coilovers for on track adjustability (could not get KW clubsports here before Oct 10-12 event at Hallett)
20x9 Viper wheels in black will have sublime painted face for the track
Bridgestone RE050A Pole Position 275/30/ZR20 tires for the track
New set (front and rear) of slotted rotors specifically for the track
EBC Yellow Stuff brake pads for the track
Motiv Power bleeder for easy one person brake bleeding at the track
Silicone brake ducting to center of wheel knuckle to cool front brakes
Power steering cooler
Magnetic door numbers (black background sublime numbers and border #1023)
Hidden trailer hitch to transport track wheels
BT catch can
BT Park lock fix

[CamoCharger]

What are you doing with your asantis?

[willi]

running them on the street. The new wheels and tires are just for the road course.

What are you doing with your asantis?

[CamoCharger]

running them on the street. The new wheels and tires are just for the road course.
ahhh, got ya.

[willi]

Yesterday was a productive day. Got a few things done:

KW v2 Coilovers in and adjusted for ride height and dampening
Mopar hidden hitch trailer hitch installed
All side moulding removed and the area claybared and waxed
New rotors installed so I can have the other set turned

Got a lot more to go will keep you all updated!

[willi]

and the lists keep growing. Just as I clear one off the waiting or next list, I seem to add another! Will this ever end LOL

[rencho75]

and the lists keep growing. Just as I clear one off the waiting or next list, I seem to add another! Will this ever end LOL

I hope not!

[willi]

I hope not!


Schroth Rallye 4 harnesses on order!
Razors Edge Motorsports adjustable tierod end to correct bump steer on order!

[willi]

just ordered the Eibach tubular front adjustable upper control arms!

[EZCORPION]

Damn willi can you sponsor my car too... geez. cant keep up with ya

[willi]

Lets just say we are on WAY different paths here my friend. I would love to pull weight off this pig and you sir steadily add it on.

Nothing wrong with it just different ways of spending a dollar!

Damn willi can you sponsor my car too... geez. cant keep up with ya

[EZCORPION]

Yeah but both cars are looking SIK!!! :D

[willi]

except for this damn dent in the roof I still need to have fixed LOL

Yeah but both cars are looking SIK!!! :D

[EZCORPION]

u cant see it that bad. unless you keep pointin it out... lol.

[willi]

just got some more stuff in!
bottom 5 items on original post!
adjustable upper control arms
Schroth 4 point ASM harnesses..........................

[Redfox0099]

pics and part # for the tow hook, I really need this for getting my car in the trailer with my winch.... Please post