new rotors and pads

[blacksax1]

How difficult is the install? Is this something I you can do on a weekend or not recommended?

[CamoCharger]

Check the Z brother. There is a complete write up with pics. If you have someone helping you and start early enough, I would almost think you could do it in about a day and a half.

[Rev Scorpion]

Rotors and pads should be a few hour job.

its simple if you have a basic knowledge of cars.

Since you wont be cracking any brakes lines its a simple job.

Camo is right, there are write-ups on most of the various LX platform forums.

[CamoCharger]

Heres on for the non-brembos. Im not sure if you upgraded your brakes or not.
http://www.chargerforumz.com/showthread.php?t=30741

[Mecha]

shit i can get the job done in less then 2 hours.

thats with full rotor swap out

[blacksax1]

Wow, thanks guys. Always helpful.

and stop bragging Mecha!!!

[blacksax1]

Camo, I did see that thread on LX, but he didn't change out his rotors so I wasn't sure if that was applicable to what i'm doing. Guess it's just an extra step though....we'll see.

[CamoCharger]

There is another thread that covers rotors. I thought you were just doing the pads, my bad

[Rev Scorpion]

shit i can get the job done in less then 2 hours.

thats with full rotor swap out


I'll see your two hours and raise ya to 1:30 for all 4!!

J/K Mecha!!!

But you are right, it is a simple job that should not - for any reason - take a whole weekend.

[Mecha]

I'll see your two hours and raise ya to 1:30 for all 4!!

J/K Mecha!!!

But you are right, it is a simple job that should not - for any reason - take a whole weekend.

ok 1 hour 15 min :)

with Pedro around me..

beat that NEWBIE to the Hemi world

[Rev Scorpion]

:kap: :kap:

I knew I was beat when you threw in Pedro.... :SHOCKED:

You are the master!!!!! :head3:

[Mecha]

Damn right i am lol....

btw you get my msg about possible store front along rufe snow?

[Rev Scorpion]

I did -
and THANKS!!!!

[blacksax1]

hey hey.....stop hijacking!!

[ChargerOsix]

I did my rotors and pads a few months ago and its easy like the guys said. Bring all your stuff to my house and I'll help ya for a 12 pack of Murphy's Red. :smiley_thumbs_up: I got a floor jack, stands, crowbar, and air tools.

[willi]

45 minutes at the track with the brembos: track wheels, track rotors and track pads! Shooting for 30 at the Hallett event! that is using an 18v Craftsman Pro impact and Cman racing jacks!